mx-HDIM
Loosening wrench especially designed for using with MAXTENSOR® adjustable/loosening tensioners.
Wire loosening and adjustment
- MX2-DT and MX2-ind tensioners are used in combination with MAXTENSOR® wrenches for adjusting and loosening wire.
- They have a hole on either side to release the blocking mechanism by inserting the MAXTENSOR® loosening wrench.
- To release the wire, the loosening wrench must be inserted into the smaller hole and then press until the wire holding mechanism is released.
Are you interested in this product?
Contact us!
Contact us!
Related products
MX2-DT
The MAXTENSOR® MX2-DT connector and tensioner is designed for joining and tensioning wires.
It is adjustable and reusable. Includes hole to release the wire.
For wire diameters between 1.8 – 3.2 mm.
MXS2-DT
The MAXTENSOR® MXS2-DT connector and tensioner is designed for joining and tensioning wires.
It is adjustable and reusable. Includes hole to release the wire.
For wire diameters between 1.4 – 2.2 mm.
mx2-ind
Joiner and tensioner for wire from 1.5 to 2.5 mm in diameter.
Includes hole to release the wire.
mx-HDI
Loosening wrench for use with mx2-DT and mx2-ind tensor adjustable/loosening tensioners. Recommended for moderate use.